Star Micronics
TSP143IVUE
TSP100IV family
Last reviewed 2026-08-27 by FoodOrders product team
Windows Agent — what this status means
The manufacturer publishes an official Windows driver for this model. We expect it to work through FoodOrders Agent, but we have not physically tested it. A test print is required.
Direct cloud printing
The manufacturer documents a cloud protocol for this model, but we have not completed and tested the integration for it.
Protocol: Star CloudPRNT
Firmware: CloudPRNT support depends on the shipped firmware — confirm before buying.
Setup notes
- Ethernet is the recommended connection for kitchen use.
- Set paper width to 80 mm in the driver before running a test print.
Known limitations
- CloudPRNT behaviour is firmware dependent; an Ethernet unit on older firmware may need a firmware update.
- A USB-only deployment cannot use direct cloud printing.
Run a FoodOrders test print
- Install the printer and its official driver in Windows.
- Confirm a Windows test page prints.
- Open FoodOrders Agent and select Refresh printers.
- Choose this printer, then Save and print test page.
- Check the chit for readability, paper width and cutter behaviour.
Evidence sources
- Star Micronics TSP100IV support and drivers — reviewed 2026-08-27